Home · Others · DCP-JW; Downloads. DCP-JW. Downloads. Select Your Operating System (OS). STEP 1: Select OS Family. Windows; Mac; Linux. Click Windows/start -> (All) Programs -> Brother -> XXX-XXXX (Where XXX- XXXX is the model number of the machine) -> ControlCenter.
|Published (Last):||24 August 2011|
|PDF File Size:||18.66 Mb|
|ePub File Size:||9.77 Mb|
|Price:||Free* [*Free Regsitration Required]|
How do I clear the message “Cannot Detect” from the display?
Scan and save a document in PDF format (Scan to File) | Brother
There are four scan options: To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of genuine Brother supplies. Brother strongly recommends that you do not refill the ink cartridges provided with your machine. For instructions on how to use this version, refer to Current Version.
To nie ten produkt? If ink stains your skin or clothing, wash with soap or detergent at once. Replace Ink Brother strongly recommends that you do not brotjer the ink cartridges provided with your machine. Your hard drive icons will appear on the desktop.
The color ink cartridges run out of ink even though you never or rarely print in color. If the ink cartridge you installed is not a brand new one, be sure to press No or 2 or the Down Arrow key. Click here to see the instructions on how to clear the message “No Cartridge” after you install the ink cartridges.
If you do so, the ink may stain your skin. Once you open an ink cartridge, install it in the machine and use it up within six months of installation.
If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.
If you want to scan and save a document in PDF format or scan multiple pages into one file, refer to the Related FAQs at the end of the page. If the LCD displays “No Cartridge” or “Cannot Detect” after you install the ink cartridges, verify the ink cartfidges are installed properly. Turn the green knob on the protective yellow cap clockwise to release the vacuum seal, then remove the cap 1.
Bardzo pomocne Pomocne Nie pomocne. Replace the Ink cartridge by following the instructions below: File Lets you scan directly to a disk file. DO NOT take out ink cartridges if you do not need to replace them.
If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned. If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. To nie ten produkt? Click here to see the instructions on how to clear the message “Cannot Detect”. DO NOT dismantle or tamper with the ink cartridge; this can cause the ink to leak out of the cartridge.
Press down on the release lever to unlock it and take out the ink cartridge for the color indicated on the LCD. If your hard drive icon Macintosh HD icon is not on the desktop: You can change the file type and destination folder, as needed.
If you replaced an ink cartridge, the LCD will ask you to verify that it was a brand new one. If you do not see the ControlCenter software, then you may be using the previous version of ControlCenter.
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów
DO NOT touch the cartridge insertion slots. For instructions on how to use this version, refer to Previous Version. The screens shown below are from the ControlCenter for Windows, they differ from the ControlCenter for Macintosh but you can follow the same steps below to configure or change the settings.
Use unopened ink cartridges by the expiration date written on the cartridge package. If you are not sure which version you have, try the steps for each version is turn.
There may be two different versions of the ControlCenter2 software available depending on your model and operating system.
In the General tab, check ” Hard disks ” in the ” Show these items on the desktop: When you first start ControlCenter a default list dxp-j315w compatible E-mail applications will appear in the drop-down list. Illustrations shown below are from a representative product and may differ from your Brother machine.
Open the ink cartridge cover. Skanownaie you do not see the ControlCenter software, then you may be using the current version of ControlCenter. Open the new ink cartridge bag for the color indicated on the LCD, and then take out the ink cartridge. We also strongly recommend that you continue to use only Genuine Brother Brand replacement ink cartridges.